ID technology Print and Apply System

Latest Install by Quick Pak Inc = an ID Technology Model IDT 252 Base Unit Right Hand, Tamp Jet Printer Applicator with Datamax Print Engine. Used to print and apply a label to cases as they move past on a convoyer system.


Comments

Post a Comment

Popular posts from this blog

Corrugated Box Flute Types

Image
Corrugated Flutes are the S shaped waves/arches of a corrugated box that makes up the board. This is called the boards corrugation. Flutes are essentially the reinforcement that make up the board. They run parallel to the depth of the container and give it its rigidity and crushing/stacking strength. As well as providing stacking strength, flutes also provide insulation that protects products from sudden temperature changes. Generally speaking, larger flutes like A & B profile provide greater strength and cushioning, while smaller flute profiles like D & E provide better printability and foldability. B flutes have 42-50 flutes per foot and are 1/8″ thick. They provide the second highest arch size. B flutes provide good stacking strength and crushing resistance. Ideally used for canned goods and displays. C flutes have 39-43 flutes per foot and are 11/64″ thick. They are the medium between A flute and B flute and are very common. C flutes provide good cus...
Read more

Preventative Maintenance for Arch Strapping Machines

Image
  Automatic arch strapping machines with more moving parts and electronic components, automatic machines require a bit more attention. Checklist: Daily: Clear strap dust and debris from the machine – particularly near the cutters and strap guide. Remove plastic residue. Weekly: Lubricate the front bar, press bar and rear bar. Monthly: Check all belts and gears for wear and tear. Clean both sides of the heater plate. Check cam rollers of seal head for easy movement. Slide table back to home position automatically by the spring tension. Clean any debris in the tension roller. Every 6 Months: Perform a deep clean and test all sensors for accuracy. Check the heater plate and make sure the connector at the wiring loom to the printed circuit board is firmly fixed. Pro Tip: Keep an eye on the sealing head – any dirt buildup can reduce the strength of your strap seals! General Best Practices for All Strapping Machines. Keep It Clean: Dust and strap residue can wreak h...
Read more

Revolver Model R-2003/5 5-100RPM with Automatic Banding and Spiral Wrapping Machine.

Image
  Quick Pak Inc installing a new Highlight Revolver Auto Band-it.   This machine will increase production and reduce the amount of time the customer is spending wrapping the profiles by hand.   It also produces a better looking finished product going to their customer.         The Revolver Auto Band-It will quickly, securely, and economically unitize your products in seconds. You select the number of wraps per band or continuous wrapping for full film coverage on your product. The Film is heat sealed at the end of the wrapping process for extra security. The film's stretch level is fully adjustable to match your specific load-holding requirements. Quick Pak Inc and Highlight can custom design an Auto Band-It to fit your unique packaging needs. Your system can be integrated with conveyors or other equipment to maximize your productivity. Easy to use controls, reliable and expandable state-of-the-art components, and quick access for changing f...
Read more