Preventative Maintenance for Arch Strapping Machines

 

Automatic arch strapping machines with more moving parts and electronic components, automatic machines require a bit more attention.

Checklist:

Daily: Clear strap dust and debris from the machine – particularly near the cutters and strap guide. Remove plastic residue.

Weekly: Lubricate the front bar, press bar and rear bar.

Monthly: Check all belts and gears for wear and tear. Clean both sides of the heater plate. Check cam rollers of seal head for easy movement. Slide table back to home position automatically by the spring tension. Clean any debris in the tension roller.

Every 6 Months: Perform a deep clean and test all sensors for accuracy. Check the heater plate and make sure the connector at the wiring loom to the printed circuit board is firmly fixed.

Pro Tip: Keep an eye on the sealing head – any dirt buildup can reduce the strength of your strap seals!

General Best Practices for All Strapping Machines.

Keep It Clean: Dust and strap residue can wreak havoc on any machine.

Use Quality Strapping Materials: Cheap materials lead to more jams and increased wear.

Train Your Team: Proper usage minimizes wear and tear.

Schedule Regular Inspections: Prevention is always better (and cheaper) than emergency repairs!

A little maintenance goes a long way in ensuring your strapping machine stays reliable and efficient. By implementing these preventative maintenance tips, you’ll avoid costly repairs, minimize downtime, and keep your packaging line running smooth.  So, get that maintenance checklist ready and show your strapping machine some TLC. 

Need professional service? Contact Quick Pak Service Dept at 813 242 6995 for expert maintenance support.